Hi-Lighter Inks
Hi-Lighter Inks
All High Lighter inks are suitable for Retractable High Lighter Markers and can be used in direct fill retractable Hi-Lighter Markers.
Pen manufacturers should evaluate these inks with polyester reservoir and nibs. These inks are Non-Dry water base inks.
These inks are distinguished by especially well balanced properties. This assortment satisfies nearly all customer requests due to a high degree of reliability and experience.
Physical data and special properties
Download physical data and special properties.
|
Ink Description |
Item # |
Color |
Viscosity CPS
at 25° C |
Specific
Gravity at 25° C |
pH |
Surface Tension |
|
Grams/CC |
at 25° C |
@ 25° C |
||||
|
Dynes/cm |
||||||
|
High Lighter Ink # 24024C |
NA |
Yellow |
8.7 - 10.2 |
1.0970 + 0.02 |
8.9 - 9.5 |
45.0 Minimum |
|
High Lighter Ink # 24040A |
NA |
Pink |
7.7 - 9.7 |
1.0870 + 0.02 |
3.0 - 4.5 |
45.0 Minimum |
|
High Lighter Ink # 24094 |
NA |
Orange |
7.0 - 10.2 |
1.0800 + 0.02 |
3.0 - 4.5 |
45.0 Minimum |
|
High Lighter Ink # 24092A |
NA |
Green |
8.7 - 10.2 |
1.0970 + 0.02 |
8.9 - 9.5 |
45.0 Minimum |
|
Fluorescent High Lighter Inks |
||||||
|
For Capped
markers: |
||||||
|
Ink Description |
Item # |
Color |
Viscosity CPS at 25° C |
Specific Gravity at 25° C |
pH |
Surface Tension |
|
Grams/CC |
at 25° C |
25° C |
||||
|
Dynes/cm |
||||||
|
High Lighter Ink # 26140 |
NA |
Yellow |
3.8 + 1.0 |
1.0890 + 0.02 |
6.0 + 1.0 |
35.0 Minimum |
|
High Lighter Ink # 26141 |
NA |
Orange |
3.8 + 1.0 |
1.0890 + 0.02 |
6.0 + 1.0 |
35.0 Minimum |
|
High Lighter Ink # 26142 |
NA |
Pink |
3.8 + 1.0 |
1.0890 + 0.02 |
6.0 + 1.0 |
35.0 Minimum |
All Inks are ASTM D-4236 and EN 71 Panel approved. The finished Gel Pen and roller pens need separate ASTM D-4236 approval. These inks are compatible with metal cartridges.
ISO 12757-1:Gel Pen inks Roller inks and refills-Part 1: General use. ISO 12757-2 Gel pens and refills-Part 2: Documentary use (DOC).
The information given herein is based on our current knowledge and experience. In view of the many factors that may affect processing and application. These claims do not relieve processors from the responsibility of carrying out their own tests and experiments. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed.
Chad Labs Corporation | Copyright © 2008-2018. All Rights Reserved. 128 Research Drive, Milford, CT 06460 | Phone: 203-877-3891 | Fax: 203-876-0578 | Email: info@chadlabs.com